The pedal impulse sealer is an ideal sealing machine for aluminum foil bags, plastic bags and composite bags in industries such as medicine, pesticides, food, daily chemicals, lubricants, etc.

What are the precautions for using pedal impulse sealer?

What should we pay attention to before operating the pedal impulse sealer?

What are the operating steps of the pedal impulse sealer?

What are the precautions for using pedal impulse sealer?

①. When operating the pedal impulse sealer, pay attention to the position of your hands to avoid burns.

②. When the pedal impulse sealer stops using, be sure to turn the heat adjustment knob counterclockwise to the minimum position.

③. When the pedal impulse sealer is sealed, the mouth of the bag should be leveled to prevent foreign objects from entering the bag.

④. The length of the suspended part of the two ends of the heating wire should not be greater than 2mm, otherwise the two ends of the heating wire will be easily blown.

⑤. When debugging the temperature of the film, the temperature should be gradually increased from small until the temperature of the film sealing (heat sealing) is suitable, but the temperature cannot be adjusted from high to low, otherwise it is easy to burn the heating wire, and burn out the electric heating tape and glue.

What should we pay attention to before operating the pedal impulse sealer?

Scope of application of pedal impulse sealer: sealing plastic film bags of various materials

Preparation before pedal impulse sealer operation:

① check whether the power cord is damaged

② Check whether the high-temperature adhesive tape is in good condition, and replace it in time if it is damaged.

③ Check whether the heating wire is broken or deformed

What are the operating steps of the pedal impulse sealer?

Test and Adjust

pedal impulse sealer uses waste bags to test seal effects, date placement and clarity. Adjust the sealing temperature, date position, and ink roller temperature according to the test results.

The thickness of the bag is 8c, the sealing temperature is 180 degrees, 10c is 190 degrees, and 12c is 200 degrees; the hot stamping temperature is between 120 degrees and 160 degrees, and it is 140 degrees when it is turned on. It will be adjusted according to the clarity later, and it is still unclear after multiple adjustments. Replace the ink roller.

After the pedal impulse sealer is adjusted, use it normally. If you find that the effect cannot be achieved during use, check the power supply, heating wire, and high-temperature adhesive tape. If you find any problems, notify the professional to repair it in time.

After using the pedal impulse sealer, turn the heat seal temperature knob counterclockwise as low as possible to turn on the sealer switch. Unplug the power plug, isolate the power supply, and arrange the power cord.

ZHEJIANG HONGZHAN PACKING MACHINERY CO., LTD as a Chinese pioneer in pedal impulse sealers, can ensure the quality and after-sales service of pedal impulse sealer.