Views: 87 Author: Site Editor Publish Time: 2022-07-19 Origin: Site
Hand impulse sealer is an ideal sealing machine for aluminum foil bags, plastic bags and composite bags in industries such as medicine, pesticides, food, daily chemicals, and lubricants.
How do we use the hand impulse sealer correctly?
What are the steps to use the hand impulse sealer?
What are the possible reasons why the hand impulse sealer can't seal the mouth?
1. Do not put metal objects under the hand impulse sealer to avoid damage to the equipment due to overloading.
2. To avoid personal injury, please use a grounded AC power socket, and the ground wire of the main circuit board must not be connected to the chassis.
3. Do not touch the circuit board and heat sink when the hand impulse sealer is working. The circuit board and heat sink have high voltage, and metal objects cannot be inserted into the case, otherwise serious electric shock accidents may occur.
4. After the hand impulse sealer is started normally, in order to avoid being scalded or electrocuted, please do not touch the sealing head at will.
1. Turn on the "power switch", after hearing a beep sound of "beep", the self-test is completed. At this time, two sets of digits are displayed steadily on the panel, namely 1.0 and 60, indicating that the hand impulse sealer has entered the standby state. (Note: The factory setting sealing time is 1.0 seconds, and the output power level is 60).
2. Hold the "sealing head" of the hand impulse sealer with your hand, place your finger on the button of the sealing head, and place the sealed bottle mouth against the center of the bottom of the sealing head. Press the button, and the machine will beep. The sealing time starts to count down from 1.0 seconds, and automatically stops counting after the countdown reaches 00 seconds. After the buzzer sounds, the sealing is over, and the sealing time returns to the initial state.
3. If the hand impulse sealer presses the work button, the buzzer will continuously emit a "beep beep" sound, and the sealing time does not count down, indicating that the machine has entered the overcurrent protection state at this time, please find out the cause of the overload before proceeding Sealing work.
The main reasons for the hand impulse sealer not being able to seal are: the temperature of the annular surface of the sealing ring is too low, which makes the film layer unable to be sealed by heat pressing. Carbide or impurities adhere to the annular surface of the sealing ring after long-term use, resulting in poor hot pressing effect, poor sealing and easy opening. The hand impulse sealer heating switch fails, and the manual seal is unstable.
ZHEJIANG HONGZHAN PACKING MACHINERY CO., LTD has clean and tidy workshop, efficient and orderly production mode and strict inspection team. Strive to minimize the defective product rate and sluggish rate, and provide customers with the most cost-effective products and the timeliest delivery.